Cabinet per DC-UPS J.Schneider AKKUTEC 2412C (EN54-4)

Caratteristiche:

Cabinet J. Schneider Elektrotechnik per DC-UPS 24V 12A

Cabinet J. Schneider progettato per sistemi di allarme, settore fire&gas, con certificazione Vds e norma di riferimento a livello internazionale EN54-4.

Il cabinet si compone di:

- DC-UPS della serie AKKUTEC, con specifiche AKKUTEC 2412;

- Modulo portafusibili con 10 uscite;

- Sensore di temperatura;

- Vano per l'alloggiamento di batterie;

- Gestione allarmi attraverso una connessione seriale RS232;

- Controllo batteria tramite misura di resistenza interna ogni 24h dopo la prima accensione (il primo controllo viene effettuato dopo 4h);

- Controllo della presenza della batteria ogni minuto;

- Sistema online;

- Segnalazione anomalie tramite LED sulla porta esterna del cabinet.

Il sistema cabinet, così come tutti i suoi componenti al suo interno, è certificato Vds ed è quindi conforme alla norma EN54-4.

Technical Data
nominal voltage: 230 VAC (-15% / +10%)
nominal frequency: 47 Hzup to63 Hz
power consumption: 380 VA, max.
input current 1.8 A (at 12A output)
inrush current: 35 A / 2 ms, max.
Output voltage
(depending on the state of charge
of the battery voltage range)
- with temperature tracking 19,8V DC-27,8V DC
- without temperature tracking 19,8V DC-26,8V DC
nominal output current 12 A, max.
(incl. battery charging current according toVdS):
deep discharge protection and load rejection: 20,4 VDC, ± 0,4%
final charging voltage
Without temp.- sensor 26,8 V DC ± 0,4%
with Temp.- Sensor 27,1V DC ± 0,4%
at 25°
efficiency: 89%
contact load relay: 30 VDC / 0,5 A, potentialfree relay contact
type of battery: lead-acid battery, maintenancefree
environmental temperature: -5°C up to 40°C (observe life duration of battery)
storage temperature -5°C up to 50°C
dimensions (HxWxD): 608 x 464 x 213mm
weight: 12,5kg without battery
protective system housing: IP30
fuse mains: 2,5A, slow acting, 250V, switch level 1500A
fuseDC-battery circuit 15A, FK2 / FKS
fuse consumer: single max. 10A, FK2 / FKS, total max. 15A

Scheda tecnica

POTENZA
150W – 300W
USCITA
Singola
TIPOLOGIA DI PRODOTTO
Chassis Mount
CAMPI DI APPLICAZIONE
Industriale
Oil & Gas