DC/DC Converter XP Power serie JHM20
Features:
- Regulated single & dual outputs from 5 to 30VDC
- Single outputs trimmable ±10%
- 2:1 Input range
- 2” x 1” footprint PCB mount
- International medical approvals
- 4kVAC reinforced isolation
- 2 x MOPP @ 250VAC working voltage
- 2.5μA Patient leakage current
- Medical approval, IEC60601-1, 3rd Edition including risk management
- EN55011 Class A with no external components
- -40°C to +80°C operating temperature
- Full power to +60°C
- 3 year warranty
The JHM20 series of single and double output PCB board mount DC-DC converters featuring a reinforced insulation system with International medical safety approvals for applications in electronic medical devices. This series optimizes the cost with a reduced patient leakage current at 2.5 μA and the output voltage adjustment of ± 10%, in a new low profile format.
The 20 Watt JHM20 is available in three input ranges: 9.0 to 18VDC for 12VDC; 18 to 36VDC for 24VDC; 36 to 75VDC for 48VDC. There are three single regulated output voltages: 5; 12 & 15VDC, trimmable ±10% using an external resistor; and three fixed dual output voltages: ±5; ±12 & ±15VDC. This combination of models allows single outputs up to 30VDC along with the three dual output options.
The units offer isolation of 4.0kVAC input/output with reinforced insulation, 2 x MOPP (Means of Patient Protection) at 250VAC working voltage, and a low 2.5µA patient leakage current. Standards include: CB IEC60601-1 including risk management (medical); UL ANSI/AAMI ES60601-1 & CSA C22.2 No. 60601-1 (medical); EN55011 Class A standard for conducted EMC emissions with no external components; IEC60601-1-2, EN61000-4-2,3,4,5,6,8 for EMC (with external components).
The efficiency of the JHM20 series is 89%, with a no-load input current between 3 and 11mA depending on model. Short circuit, overload & overvoltage protection is provided, together with under voltage lockout. Operating altitude is 3048m (10,000 ft). The MTBF is greater than one million hours (MIL-HDBK-217F, +25°C GB).
Packaged in non-conductive UL94V-0 black plastic PCB mount case which measures 2.00” x 1.00” x 0.40” (50.8 x 25.4 x 10.2mm). The convection cooled converters have a wide operating temperature range of -40°C to +80°C, with full power available to +60°C (see datasheet for derating curve).
The JHM20 PCB mount DC-DC converters for medical applications are suitable for low power medical applications where there is a requirement for a DC-DC converter to provide a reinforced isolation barrier in patient contact or patient vicinity applications.
Model | Output Voltage | Input Voltage | Output Current | Efficiency |
JHM2012S05 | 5.0 V | 9-18 V | 4000 mA | 88% |
JHM2012S12 | 12.0 V | 9-18 V | 1670 mA | 88% |
JHM2012S15 | 15.0 V | 9-18 V | 1333 mA | 89% |
JHM2012D05 | ±5.0 V | 9-18 V | ±2000 mA | 86% |
JHM2012D12 | ±12.0 V | 9-18 V | ±833 mA | 88% |
JHM2012D15 | ±15.0 V | 9-18 V | ±667 mA | 89% |
JHM2024S05 | 5.0 V | 18-36 V | 4000 mA | 88% |
JHM2024S12 | 12.0 V | 18-36 V | 1670 mA | 89% |
JHM2024S15 | 15.0 V | 18-36 V | 1333 mA | 88% |
JHM2024D05 | ±5.0 V | 18-36 V | ±2000 mA | 86% |
JHM2024D12 | ±12.0 V | 18-36 V | ±833 mA | 89% |
JHM2024D15 | ±15.0 V | 18-36 V | ±667 mA | 88% |
JHM2048S05 | 5.0 V | 36-75 V | 4000 mA | 88% |
JHM2048S12 | 12.0 V | 36-75 V | 1670 mA | 88% |
JHM2048S15 | 15.0 V | 36-75 V | 1333 mA | 88% |
JHM2048D05 | ±5.0 V | 36-75 V | ±2000 mA | 85% |
JHM2048D12 | ±12.0 V | 36-75 V | ±833 mA | 89% |
JHM2048D15 | ±15.0 V | 36-75 V | ±667 mA | 88% |
Data sheet
- Applications
- DC-DC
Industrial
Medical - POWER
- 10W-50W
- OUTPUT
- Dual
Single - PRODUCT RANGE
- 2" x 1"
- FIELD OF APPLICATION
- Medical