DC-UPS SuperCaps J.Schneider C-TEC 24V

Contact us for more information

Please fill in this form to contact us


I understand that by clicking on the button below, I accept the Privacy Policy by art.13 of the 2016/679 EU European Regulation (GDPR).

Features:

J.Schneider Elektrotechnik Capacitor buffered Power Supply 24V

J. Schneider Elektrotechnik DC-UPS of the series C-TEC includes ultra-capacitors as energy storage inside the housing. This capacitor is charged with the system voltage (Ue) during normal operation. The connected loads are supplied as well from the system voltage. In case of an interruption of the system voltage the energy of the ultra-capacitors is released in a regulated way. With a dc/dc converter, the load is supplied by the capacitor until it is discharged. The back-up time depends on the state of charge of the capacitor and on the discharge current.


Features:

- Maintenance-free because of long-life ultra-capacitors
- Microcontroller based charging and discharging of the ultra-capacitors
- Parameterizable via USB interface
- Control of operation and status of charge with LED’s
- Compatible with the TECControl-Software

Technical Data
Nominal input voltage 12VDC -15% / 10%
Input voltage range 10,2V … 13,2VDC
Min. charging voltage 11,8VDC
Nominal input current (at 24,0 V DC) C charged 3 A load 3,1ADC
Output voltage in back-up operation 11,5VDC ±2%
Nominal output current Max 3ADC (at 0,47 kJ /0,94 kJ)
Nominal output current at maximum energy 2 A DC (at ,05 kJ / 1,0 kJ)
Current limitation 1,05 … 1,2 x INom
Power loss at Uc > 2,5W
Power loss at 100 % load and charge 7 W (max. 60 seconds)
Efficiency at Uc > >96% @ (Ue=12,0VDC; Ua=11,5VDC; Ia=INom)
Internal device protection (internal) 4A (T)
fusing DC-output circuit (external) 3A (T)
Type of connection: input Ue Spring terminal max. 1,0mm²
Type of connection: output Ua Spring terminal max. 1,0mm²
Type of connection: message contacts Spring terminal max. 1,0mm²
Protective system IP20 u. EN60529
Operational temperature -20°C … 60°C
Storage temperature -20°C … 60°C
Rel. humidity ≤95% no condensation
Max. mounting height (without load reduction) 2000m above sea level
dimensions (HxWxD) 92,5mm, 60mm, 116mm
weight 0,6Kg
Fixation Snap-on mountingfor DIN top hat rail
UL approvals No

Data sheet

POWER
10W-50W
50W-100W
OUTPUT
Single
PRODUCT RANGE
DIN Rail
FIELD OF APPLICATION
Industrial